HTC P3600 e rede sem fios

[luficobogo]

olá todos

tenho uma rede sem fios em casa

2 portateis com wifi a funcionar 100%

não consigo internet no Pda

detecta rede sem fios
pede wpa
liga (pelo menos o icone das setas fica fixo)
não abre nenhuma pagina dá o erro
"não consegue aceder pagina:::::"

[Semenkhare]

Devem ser as configurações do Wi-Fi. Li isto num forum, talvez te possa ajudar:

"If you have wireless on your laptop, and wireless on your ppc, you don't need a router.

Create an adhoc network between the devices, the process to do this varies, but generally, on the windows computer, go to network connections, select your wifi connection, add a new identity, and then allow your ppc to connect to it:

for Windows XP:
Install a wireless access point manually
1. Click Start, and then click Control Panel.
2. Double-click Network Connections.
3. Right-click Wireless Network Connection, and then click Properties.
4. Click the Wireless Networks tab.
A list of wireless access points appears in the Available networks box.
5. Under Preferred networks, click Add.
6. In the Network Name (SSID) box, type the name of the access point and select the appropriate check boxes, according to your network requirements.
You may have to ask the LAN administrators for specific settings. If you are on a domain, you may have to request client certificates.
7. Click OK.
After you add the new access point, you can connect to the new network.

After you've done this, turn wifi on on your ppc, it will say it's found a new connection, ask if you should connect to it, say yes, enter the WPA key if you set one up (which you should, or anyone can use the connection).

Once it's set up, on your PPC:
1. Click Start -> Settings
2. Go to the Connections tab, select Wi-Fi.
3. Click on the Network Adapters tab, and select something similar to tiacxwin Compatible Wireless Etherne...
4. This will open the settings window, select Use specific IP address in the IP address box type: 192.168.0.1
5. Click on the Name Servers tab, enter the DNS servers of your ISP, in the DNS and Alt DNS boxes.
6. Click X to save.
7. Restart the wifi connection (disable/enable)

Back on your windows XP computer, go up to step 4, so you're sitting on the properties window.
1. Select Internet Protocol TCP/IP, click Properties
2. Click Use the following IP address and in the IP address box enter 192.168.0.2, in the Subnet mask enter 255.255.255.0, in the Default gateway enter 192.168.0.1 (if you gave your ppc a different ip, then use that one).
3. Click Use the following DNS server addresses[b] and in the [b]Preferred DNS Server and Alternate DNS server boxes enter the same DNS servers you use in step 5 of the PPC setup.
4 Click OK, then click Close.

Start your GRPS or EDVO internet connection on your ppc, and you should now have an internet connection, via wifi on your PPC."

Cumps!