Moderadores: Administradores, Moderadores




s3ntry Escreveu:Peco desculpas vir discordar mais uma vez, mas por experiencia propria, em plataforma Intel, nao consigo meter dual-channel a funcionar com DIMMs de caracteristicas diferentes.
Nao sei como se comportam as memorias na plataforma AMD, mais concretamente no chipset NF2, como referiu o Sir Lancelot, pelo que aceito que funcione. Contudo, ate prova em contrario, continuo na minha, que nos chipsets 865/875 nao da




slot 1&2 have a 512MB module in each slot:
channel 1 = 1024 MB
slot 3 has a 512MB module as well:
channel 2 = 512MB
channel 2 has only 512mb of ram *2 = 1024 in 128bit mode, the remaing 512mb of channel 1 are run in 64 bit.
example 2
slot 1&2 have a 128MB module in each slot:
channel 1 = 256 MB
slot 3 has a 512MB module :
channel 2 = 512MB
channel 1 has only 256mb of ram *2 = 512 in 128bit mode, the remaing 256mb of channel 2 are run in 64 bit.
[bold]example 3:
slot 1&2 have a 256MB module in each slot:
channel 1 = 512 MB
slot 3 has a 512MB module:
channel 2 = 512MB
channel 2 and channel 1 have the same amount of memory so the whole ram is in 128bit mode.
example 4
slot 1 has a 512MB module, slot 2 is empty
channel 1 = 512MB
slot 3 has a 512MB module:
channel 2 = 512MB
channel 2 and channel 1 have the same amount of memory (1GB) so the whole ram is in 128bit mode.

Stu3s Escreveu:
Vários exemplos:example 3:
slot 1&2 have a 256MB module in each slot:
channel 1 = 512 MB
slot 3 has a 512MB module:
channel 2 = 512MB
channel 2 and channel 1 have the same amount of memory so the whole ram is in 128bit mode.
Por exemplo uma solução que indicas-te foi de ter 256+(256+512), isto n funciona tudo em dual ddr. Apenas tens 512 a 128 bit, os restantes 512 estao em 64bits.

Voltar para Processadores, Chipsets e Motherboards
Utilizador a ver este Fórum: Nenhum utilizador registado e 1 visitante